VBC Racing WildFire D06 Building Blog Step 4-6

Step 4-6 Front & Rear Drive Train Assembly

Due to the chassis has been 60% built, there are no much works to do with Lower Bulkheads and Motor Mount build. You just have to make sure all bottom screws are firmly tighten.

Now lets build the Center Arm Mount Blocks. Just screw in two 3x6mm Flathead screws but do not tighten-up yet. leave a little space in between.

Now, push screws back in to insert the Center Suspension Arm Shim. Then you can hold the block and shim together while tightening up screws.

Repeat the process for all 4 Center Arm Mount Blocks.
Setup ready. Step 4-6 Done.
Please note: You may notice that my screws color are gun metal, not black. Yes, I replaced most of factory steel screws with titanium ones : ) 

<<-Visit SpeedyRC Online eStore