Thursday, July 17, 2014

VBC Wildfire battery hold down system customize mod

Today I would like to share a customize mod for VBC Wildfire D06 battery hold down system.
For people who do not like to using battery tape to hold down battery on chassis, you may find this method will be very helpful.
Alright, Pics up!

Where I got the parts from?
Have a look at below, I bought it from a friend. It is not perfect fit, I have to grind the holes to make them a bit more far to the end points.

After all, the whole job is pretty easy. Only thing you need are a hand held grinder/driller, M3x14-18mm counter-sink screws x2.
Now then, forget about the sticky tape stuff! Race with a clean and tidy chassis!
Thanks for watching!