New paint job done for local club member Terry N.
Speedy RC Racing Blog
Tuesday, August 11, 2015
Sunday, February 15, 2015
Monday, September 1, 2014
Monday, August 25, 2014
New Airbrush Paint Job of August
New custom paint job for local club member Trent D. On BittyDesign Striker 3.0.
Want to buy BittyDesign Striker 3.0 TC Car body?
Come visit our website:www.speedyrc.com.au
Want to buy BittyDesign Striker 3.0 TC Car body?
Come visit our website:www.speedyrc.com.au
Thursday, August 14, 2014
New Airbrush Paint job for BittyDesign Striker SR 3.0 190mm Car Body
New Paint job for Local club member Mal P.
on BittyDesign Striker SR 3.0 190mm Car Body.
This body has a little mod of rear wing mount points. Besides, everything is the same to 2.0 body. Also, the new 3.0 body is lighter than 2.0 one.
If you like me to do a custom paint for your car body, please contact info@speedyrc.com.au. Price start at $50. ^_^
on BittyDesign Striker SR 3.0 190mm Car Body.
This body has a little mod of rear wing mount points. Besides, everything is the same to 2.0 body. Also, the new 3.0 body is lighter than 2.0 one.
Monday, August 11, 2014
Thursday, July 17, 2014
VBC Wildfire battery hold down system customize mod
Today I would like to share a customize mod for VBC Wildfire D06 battery hold down system.
For people who do not like to using battery tape to hold down battery on chassis, you may find this method will be very helpful.
Alright, Pics up!
Where I got the parts from?
Have a look at below, I bought it from a friend. It is not perfect fit, I have to grind the holes to make them a bit more far to the end points.
After all, the whole job is pretty easy. Only thing you need are a hand held grinder/driller, M3x14-18mm counter-sink screws x2.
Now then, forget about the sticky tape stuff! Race with a clean and tidy chassis!
Thanks for watching!
For people who do not like to using battery tape to hold down battery on chassis, you may find this method will be very helpful.
Alright, Pics up!
Where I got the parts from?
Have a look at below, I bought it from a friend. It is not perfect fit, I have to grind the holes to make them a bit more far to the end points.
Now then, forget about the sticky tape stuff! Race with a clean and tidy chassis!
Thanks for watching!
Subscribe to:
Posts (Atom)